A DCV that is undertaking an overseas voyage is considered a regulated Australian vessel (RAV). It must comply with the statutory certification requirements that apply to it under the Navigation Act 2012.
Instructions
Note: If you are taking a vessel overseas for dry docking, it must not carry passengers or cargo.
- Step 1: Ensure your vessel is registered on the Australian General Shipping Register
All Australian vessels travelling from or to a foreign port are required to be registered.
Your vessel may already be registered, which means there's nothing more you need to do. If you're not sure, contact AMSA Connect to confirm your vessel is correctly registered.
- Step 2: Contact a recognised organisation (RO) to obtain Navigation Act certificates
If your vessel:
- is in class, contact the RO you’re in class with
- has previously been in class, contact the RO you’ve previously been in class with
- has never been in class, contact an RO regarding requirements.
The RO will survey and certify your vessel to find out if it's in a suitable condition to undertake an overseas voyage.
If your vessel is in a suitable condition, you may be issued with short-term statutory certificates for the intended voyage.
See a list of ROs.
- Step 3: Notify AMSA
Provide us with details of your intended operations.
- Step 4: Apply to suspend all active National Law Act 2012 certificates
When the RO has issued statutory certificates under the Navigation Act, apply to suspend all active National Law Act 2012 certificates for the duration of the overseas voyage.
- Step 5: Apply for a minimum safe crewing document
Your crew will be required to hold relevant certification and qualifications. You'll also need to have a certain number of crew depending on the size of your vessel.
Apply for a minimum safe crewing document so we can assess whether your vessel will be safely crewed.
Learn more about RAV crewing.
- Step 6: Meet ISM Code requirements
Vessels 500 gross tonnage (GT) and over
See Marine Order 58: Safe management of vessels for instructions.
Vessels under 500 GT
Produce a declaration that an ISM system meeting Part A, is implemented onboard according to Marine Order 31: SOLAS and non-SOLAS certification.
Forward this declaration to ism-fsc@amsa.gov.au before the voyage.
See also ISM Certification Guidelines for RAVs: Introduction.
- Step 7: Apply for Maritime Labour Convention (MLC) 2006 certification
All vessels need to comply with the MLC 2006, including vessels that aren't crewed at all times.
Vessels crewed at all times
See Marine Order 11 (Living and working conditions on vessels) 2015 for instructions.
Vessels not crewed at all times
- Step 8: Apply for an IMO Number
Vessels that need an IMO number include:
- ships 100 GT and above, including fishing vessels of steel and non-steel hull construction
- passenger ships of less than 100 GT
- high-speed passenger craft and mobile offshore drilling units engaged on international voyages.
See IMO Identification Number Schemes for instructions.
- Step 9: Meet ISPS requirements (if applicable)
If you are sailing a passenger vessel or cargo vessels of 500 GT or above on an international voyage, you will need to comply with the International Ship and Port Security (ISPS) Code.
See AMSA Marine notice 7/2015- Piracy and armed robbery against ships for instructions.
- If returning to Australia
If your vessel is returning to Australia and won’t undertake further overseas voyages, when you arrive back you’ll need to:
- ask the RO you’re in class with to revoke your vessel’s Navigation Act 2012 certificates (MARPOL Pollution Certificates and the International Tonnage Certificate may be retained)
- be re-certified as a DCV under the National Law Act 2012
- apply to reinstate National Law Act Certification.
Please provide us with details of your intended operations now so we can advise you on the process.
Note: Your vessel may be inspected by port State control when it arrives at its overseas destination.