Published on Australian Maritime Safety Authority (https://www.amsa.gov.au)
Accredited surveyors should be familiar with these laws and standards:
| Instruction | Document number |
|---|---|
| Verifying ISO derived EU conformity assessment first of type righting movement curve (GES 2014/03 refers) | DCV-ITS-001 PDF596.92 KB |
| Instruction to surveyors for issuing a temporary operations approval | DCV-ITS-002 PDF320.36 KB |
| Test procedure to verify level flotation | DCV-ITS-004 PDF196.62 KB |
| Inspection, testing and replacement requirements for fluid power system (hydraulic) flexible hoses on domestic commercial vessels—roles and responsibilities | DCV-ITS-006 PDF276.5 KB |
| Welding inspection for aluminium vessels in accordance with AS/NZS 1665 | DCV-ITS-008 PDF226.72 KB |
| Conducting sea trials | DCV-ITS-009 PDF558.86 KB |
| Accredited surveyor documentation approval | DCV-ITS-011 PDF326.74 KB |
| Conditions where the use of flush hatches are acceptable | DCV-ITS-012 PDF414.85 KB |
| Considerations when using Lloyds SSC software | DCV-ITS-014 PDF292.9 KB |
| ELV electrical systems on board new domestic commercial vessels | DCV-ITS-015 PDF1.85 MB |
| International delivery of domestic commercial vessels and near coastal vessels operating overseas | Marine Notice 10/2016 |
| Imported CE leisure craft | DCV-ITS-016 PDF1.63 MB |
| Initial and periodic surveys of foam | DCV-ITS-017 PDF396.21 KB |
| Initial survey of hovercraft less than 35 metres | DCV-ITS-019 PDF228.01 KB |
| Freeboard Marks - National Standard for Commercial Vessels (NSCV), Part C2 – Watertight and Weathertight integrity (NSCV Part C2). | DCV-ITS-020 PDF107.59 KB |
| Lloyd’s guidance note for double continuous (DC) welding where Lloyd’s SSC rules are used PDF150.41 KB | N/A |
| Methods for inspection of foam buoyancy, hull voids and fuel tank compartments | DCV-ITS-022 |
Additional guidance is available in our industry guidance notices and fact sheets on these topics: