Published on Australian Maritime Safety Authority (https://www.amsa.gov.au)
A crew member’s arm was crushed between the vessel and a pylon while tending to mooring lines.
A charter vessel was coming alongside to berth. An experienced crew member was handling the lines on the port aft bollard.
While attempting to move the line around a pylon to secure the vessel, their arm became jammed between the bollard and the pylon. This caused a crushing injury to their arm that required medical attention.
The investigation found that:
A major contributing factor to crew injuries is the quality of Safety Management System implementation, including risk assessment, safety procedures, crew training and emergency drills1 .
It is important that risk assessments consider the ways in which injuries may occur in the operation of a vessel.
General safety duties require that owners provide information, instruction, training or supervision to people on board the vessel to ensure their safety.
Safety management systems must be based on a risk assessment of a vessel’s operations. It must include written procedures for onboard operations that address the risks identified in the risk assessment. The owner must ensure that the master and crew receive induction, familiarisation and training in these procedures. The training and induction must be recorded in writing, including the name and signature of any person participating, and the date the training occurred.
1 AMSA, National Compliance Plan 2024-25, Risk Area 3.6, Poorly implemented safety management systems.